|
|
|
|
|
|
|
|
|
|
|
|
|
|
Installed in the block foundation to provide ventilation of crawlspaces and under home spaces. Fits standard, metric and queen brick and block. Provides the ability to open and close for changes in needs based on seasonality.
|
Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant polypropylene.
|
One-piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A high-quality finish, thanks to the patented lock-on trim ring. Available with scalloped or square corner details & fits 4" exhaust pipe. Patented exhaust flaps stay closed when not in use.
|
Master Flow? foundation vents help to remove damaging moisture that can lead to mold growth and structural decay in the foundation area of the home.
|
Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange and level lines. Injection-molded UV-resistant polypropylene for impact. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 44 sq-in of net-free area.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for venting bathroom and kitchen exhaust fans, not for use as dryer or furnace vent, durable, maintenance free, UV stabilized and constructed with color molded-through so they wont scratch, flake or fade, full fiberglass screening for complete insect protection, net-free area 12 sq-in. Lifetime limited warranty. Made in USA.
|
Master Flow? foundation vents help to remove damaging moisture that can lead to mold growth and structural decay in the foundation area of the home.
|
Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange and level lines. Injection-molded UV-resistant polypropylene. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 58 sq-in of net-free area. Includes a 3 in snap on trim ring for easy installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange and level lines. Injection-molded UV-resistant polypropylene. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 55 sq-in of net-free area.
|
Installed on an existing base from a whirly bird or turbine vent, both 12 or 14 in. Intended for a sloped, shingled roof to ventilate hot, moist attic air as a part of a balanced ventilation system. Installed within 24 in of the roof's peak.
|
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange and level lines. Injection-molded UV-resistant polypropylene. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 90 sq-in of net-free area.
|
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
|
Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange and level lines. Injection-molded UV-resistant polypropylene for impact. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 44 sq-in of net-free area for 12 in x 18 in and 18 in x 24 in. 74 sq-in of net-free area for 22 in x 28 in. Rough cut opening is 12-1/2 in x 18-1/4 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Galvanized construction, externally braced for added strength. Heavy-duty construction ideal for coastal and high wind areas. Simple, two-piece assembly for faster installation. Permanently lubricated dual bearing system for long-lasting performance. Stainless steel ball bearings. 720 cfm air movement. No.GC12E Dade County Approved 02-0524.03. Nos.GC12EF and GC12EWWF Florida Building Code (FBC) Approved FL5027.
|
Woven natural fibers designed to keep nature out. Easy installation. Low profile design.
|
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
|
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
|
High-impact resin. Scratch, crush and dent-resistant, with UV inhibitors to keep consistent color. 12% larger flashing with pre-drilled nail holes and a built-in screen to deter birds and rodents and prevent clogging. Slant back design to prevent weather infiltration especially in deep slope applications. Hood is snapped in place rather than tacked to reduce the chance of blow-off. 11-3/4 in x 10-3/4 in opening, 20-1/4 in x 18 in flashing, 5-7/8 in H. 65 sq-in of net-free ventilating area. CSA listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our finest metal roof louver, with fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging.
|
Our finest metal roof louver, with fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging.
|
Master Flow? foundation vents help to remove damaging moisture that can lead to mold growth and structural decay in the foundation area of the home.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our finest metal roof louver, with fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging.
|
Cobra? Snow Country? exhaust vent for roof ridge allows heat and moisture to escape and helps resist snow infiltration in harsh winter weather. It provides 18 sq-in per ft of net-free ventilating area. The unique EasyTear? sizing feature allows you to hand-tear product in 3 in increments - no knives necessary and less waste.
|
Master Flow? foundation vents help to remove damaging moisture that can lead to mold growth and structural decay in the foundation area of the home.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Master Flow? foundation vents help to remove damaging moisture that can lead to mold growth and structural decay in the foundation area of the home.
|
Master Flow? foundation vents help to remove damaging moisture that can lead to mold growth and structural decay in the foundation area of the home.
|
|
|
3 Store Locations
