Home > HARDWARE > CONSTRUCTION HARDWARE > JOIST HANGERS & CONNECTORS > STRAPS
We found 30 results matching your criteria.
Sort By:
Page of 1
DECK JOIST TIE ZMAX BLK 2X4IN FLAT STRAP ZMAX 12GA 3X11-1/4 DECK JOIST TIE ZMAX BLK 2X6IN
The Simpson Strong-Tie? Outdoor Accents? line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The deck joist tie attaches 2X joists to the side of 4X or larger support posts. It installs quickly and easily with the Outdoor Accents? structural wood screw and hex head washer for the look of a bolted connection. Part of the Avant collection. The Outdoor Accents decorative hardware product line features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The APVST flat strap works for lumber in both nominal and rough sizes. It can be used to connect two beams together or added to any project as a decorative accent. Part of the Avant Collection. The Simpson Strong-Tie? Outdoor Accents? line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The deck joist tie attaches 2X joists to the side of 4X or larger support posts. It installs quickly and easily with the Outdoor Accents? structural wood screw and hex head washer for the look of a bolted connection. Part of the Avant collection.
L-STRAP ZMAX BLACK 12GA 4X4IN T-STRAP ZMAX BLACK 12GA 4X4IN L-STRAP ZMAX BLACK 12GA 6X6IN
Outdoor Accents? flat L-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This L-strap is easily installed with Outdoor Accents? structural screws and hex head washers. Part of the Avant Collection. Outdoor Accents? flat T-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This T-strap is easily installed with Outdoor Accents? structural screws and hex head washers. Part of the Avant collection. Outdoor Accents? flat L-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This L-strap is easily installed with Outdoor Accents? structural screws and hex head washers. Part of the Avant Collection.
L-STRAP ZMAX BLACK 12GA 6X6IN T-STRAP ZMAX BLACK 12GA 6X6IN T-STRAP ZMAX BLACK 12GA 6X6IN
Outdoor Accents? flat L-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. These straps are easily installed with Outdoor Accents? structural screws and hex head washers. Outdoor Accents? flat T-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This T-strap is easily installed with Outdoor Accents? structural screws and hex head washers. Part of the Avant collection. Outdoor Accents? flat T-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look.
STRP-TIE HOLDOWN GALV 39-5/8IN L-STRAP GALV 14GA 6 X 6IN T-STRAP GALV 14GA 6 X 6IN
The STHD is an embedded strap-tie holdown offering high-loads in both wood and cold-formed steel construction. When installed on the forms with the StrapMate? strap holder or other holding device, the unique design of this cast-in-place strap-tie holdown delivers enhanced stability before and during the pour to help prevent both parallel and perpendicular movement. This results in accurate positioning of the strap and reduced possibility of spalling. The L is designed for beam-to-column applications. This versatile utility strap is L-shaped, making it ideal for transferring tension loads in a variety of applications. The L features well-placed fastener holes and can easily be installed with nails or bolts. The T is designed for beam-to-column applications. This versatile utility strap is T-shaped, making it ideal for transferring tension loads in a variety of applications. The T features well-placed fastener holes and can easily be installed with nails or bolts.
STRAP TIE LIGHT GALV 1-1/4X9IN STRAP TIE HVYD GALV 12GA 6IN STRAP TIE HVYD GALV 12GA 8IN
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members. The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties. The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties.
STRAP TIE LT GALV 1-1/4 X 12IN STRAP TIE LT GALV 1-1/4 X 18IN L-STRAP ZMAX BLACK 12GA 4X4IN
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members. The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members. Outdoor Accents? flat L-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. These straps are easily installed with Outdoor Accents? structural screws and hex head washers.
DECK JOIST TIE ZMAX 14GA 4X4IN DECK JOIST TIE ZMAX 14GA L-STRAP GALV 14GA 8 X 8IN
The DPTZ deck post tie products are used to attach 4 x 4 (DPT7Z) vertical posts to the side of stringers, rims or other wood members. The DJT14Z deck joist tie is designed to attach 2X deck joists to the side of 4X or larger support posts. The DJT14Z can be installed with either nails or bolts. The L is designed for beam-to-column applications. This versatile utility strap is L-shaped, making it ideal for transferring tension loads in a variety of applications. The L features well-placed fastener holes and can easily be installed with nails or bolts.
T-STRAP ZMAX BLACK 12GA 4X4IN STRAP TIE LT GALV 1-1/4 X 24IN STRAP TIE HVYD GALV 12GA 12IN
Outdoor Accents? flat T-strap from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. These straps are easily installed with Outdoor Accents? structural screws and hex head washers. The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members. The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties.
TWIST STRAP LT GALV 18GA 12IN COILED STRAP GALV 16GA 25FT STRAP TIE GALVANIZED 16GA 12IN
The LTS provides a tension connection between two members, resisting light to medium uplift loads at the rafter or heel of a truss. This economical light twist strap has a small bend section to reduce interference at the transition points between the two members. The CS is a continuous utility strap designed to resist tension and uplift loads. This coiled strap can be cut to length on the job site and used in a single 2X stud or post application. The CS is ideal for many applications including resisting uplift in a floor-to-floor application and also resisting tension in a horizontal application. The ST is designed to resist tension loads in a variety of applications. This economical strap-tie is ideal for installation where top or bottom plates are cut, at wall intersections and as ridge ties. The ST is a load-rated, precut strap designed for quick installation and optimal performance.
STRAP TIE LT GALV 1-1/4 X 36IN STRAP TIE GALV MED 1-1/4X36IN TIE STRAP MEDIUM ZMAX 36INCH
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members. Simpson Strong-Tie Hold Down, Steel, ZMAX, 36 in L, 1-1/4 in W, Material Gauge: 16 ga, Fastening Method: Nails