|
|
|
|
|
|
|
|
|
|
|
|
|
|
Coilex tapered plastic baffle-trim with self-flange in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
Open trim with socket support in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
Diameter of 6-1/2", white trim for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full cone baffle-trim with self-flange in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
"For use with 120 volt Incandescent lamps. Aluminum construction for greater heat dissipation. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2"" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24"" joist span. Can be field shortened for 12"" joist. Installation: 7-1/2"" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 2"" thick. Requires 6-1/2"" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated."
|
Coilex? baffle trim in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal as an energy-saving retrofit solution, but also suitable for new construction and remodeling installations, the LT4 is an LED baffle trim module for use in 4 in aperture recessed downlights. The downlight is UL certified for use with HALO and other compatible housings and the precision construction makes any housing airtight for added HVAC savings and code compliance. A wide distribution makes the LT4 ideal for general and task lighting.
|
White trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815) and H7RT (942.0381).
|
Wet location and AIR-TITE listed white trim with frosted Albalite Lens. 8" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381), and SHALLOW H27T (989.1672). Sleeved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The H7 family of recessed housings are the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H7RICT is designed for installations where the housing will be in direct contact with insulation. H7RICT may be converted into Air-Tite? installation when used with Air-Tite? trims.
|
The H7 recessed housing is the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. H7ICAT is for installations where the housing will be in direct contact with insulation and also meet restricted air flow requirements.
|
The Halo H5 Series is designed to accommodate smaller sized PAR20 and PAR30 halogen lamps. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H5ICAT is designed for use in insulated ceiling applications. This is an Air-Tite? housing and may be used to meet restricted air flow requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LED surface mount downlight. Dimmable, showerlight. Fits most J-boxes and recessed housings. 3000K, 50000 average life hours.
|
Halo BLD6 Recessed Lighting Trim, Lumens: 800 Lumens, Recessed Can Diameter: 6 in, White, Temperature Rating: 3000 K, Includes: Torsion Spring
|
Coilex? baffle trim for 4 in H99 incandescent family and H470 CFL family of recessed housings. Die-cast trim ring is available in a variety of finishes. Polymer Coilex? baffle is available in white and black. Three cat's paw springs secure trim in housing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The H99ICAT is a small aperture IC AIR-TITE? housing for accent and task lighting. It is designed for use in insulated ceilings where it will be in direct contact with insulation. It is an AIR-TITE? housing designed to prevent air flow between living spaces and unconditioned areas.
|
Recessed downlight. 5 selectable colors, 2700K, 3000K, 3500K, 4000K and 5000K. 70000 hours average life. UL Certified, Energy star.
|
No driver, quick and easy-to-install. White with acrylic lens, dimmable, recess mounted, J-box included. Suitable for wet location and contact with insulation, minimum start temperature is -40 deg C.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ETI Edge-Lit Downlight, 120 V, 8.5 W Wattage, Dimmable, Triac Ballast, 50,000 hr Average Life, 450 Lumens , 2700, 3000, 4000, 5000 K Color Temperature, Recessed Can Diameter: 3 in, Dimmable , -13 to 104 deg F
|
A complete ultra-thin direct mount down light that chooses the color temperature directly on the fixture. Choose between 5 color temperatures ranging from warm (2700 K) to daylight (5000 K) prior to installing in ceiling. For use in new construction, remodel and retrofit installation, without needing a housing or j-box. LED driver offers 120 volt dimming capability. The HLB4 lens provides uniform illumination in wet location listing. HALO matte white finish with textured lens to provide smooth light distribution. Fixture is built to last with maintenance-free energy efficient LEDs with 50,000 hours of light. IC rated, for direct contact with insulation. Airtight, wet rated, can be used in shower and outdoor light applications. 1/2" depth for use in shallow ceilings. Fits into applications with as little as 3.5" plenum clearance.
|
Halo BLD4 Downlight, 120 V, 0.087 A, Wattage Rating: 10 W, Trim Type: Surface Mount, Lamp Base: E26 Edison Screw, Lamp Type: LED, Surface Mounting, Ceiling Type: Recessed, Average Life: 50000 hr, Lumens: 800 Lumens, Color Temperature: 2700, 3000, 3500, 4000, 5000 K, Color Rendering Index (CRI): 90, Aluminum, Bright White/Daylight/Neutral White/Soft White/Warm White, Dimensions: 6-3/16 in Dia x 7/8 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Halo Backlit LED Downlight (BLD) incorporates state of the art lighting technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. BLD6 is designed for installation in many 3-1/2 in and 4 in round or octagon junction boxes including pancake boxes. It can also retrofit in 5 in or 6 in aperture IC and non-IC recessed housings. Suitable for residential or commercial installations.
|
Recessed downlight. 5 selectable colors, 2700K, 3000K, 3500K, 4000K and 5000K. 70000 hours average life. UL Certified, Energy star.
|
ETI Edge-Lit Downlight, 120 V, 11 W Wattage, Dimmable, Triac Ballast, 50,000 hr Average Life, 650 Lumens , 2700, 3000, 4000, 5000 K Color Temperature, Recessed Can Diameter: 4 in, Dimmable , -13 to 104 deg F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Direct mount. Does not require recessed housing or junction box. Delivers up to 1,100 lumens. 2700, 3000, 3500, 4000 and 5000 K field selectable CCT. 6" ultra-thin LED lens down light with remote driver. Wet location listed for showers and protected ceilings. Dimmable with 120 volt dimmers.
|
ETI Edge-Lit Downlight, 120 V, 15 W Wattage, Dimmable, Triac Ballast, 50,000 hr Average Life, 900 Lumens , 2700, 3000, 4000, 5000 K Color Temperature, Recessed Can Diameter: 6 in, Dimmable , -13 to 104 deg F
|
The Halo RL4 deep baffle is a complete LED baffle-trim module for 4 in aperture recessed downlights suitable for new construction, remodel and retrofit installation. The regressed lens provides uniform illumination and 50 deg optical cutoff. The deep baffle comes standard with both white and black Coilex baffle insters and is wet location. Precision construction makes any housing AIR-TITE for added savings and code compliance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The RLD deep baffle Series is a complete LED baffle-trim module for 4 in (RLD4) or 6 in (RLD6) aperture recessed downlights suitable for new construction, remodel and retrofit installation. The regressed lens provides uniform illumination and 50 deg optical cutoff. The deep baffle comes standard with both white and black coilex baffle included and is wet location. Precision construction makes any housing airtight for added savings and code compliance.
|
The Halo RL6 direct-mount is a SeleCCTable? complete LED baffle-trim module for 6 in aperture applications, all without the need for a recessed housing, suitable for new construction, remodel and retrofit installation. Using the CCT selectable switch users can chose between five different color temperatures. The RL family offers a regressed lens that provides uniform illumination and wet location listing. Precision construction makes this product AIR-TITE for added savings and code compliance.
|
Gimbal adjustable downlight, 5 selectable colors, 2700K, 3000K, 3500K, 4000K and 5000K. 7 watts, 70000 hours life. UL Certified. 35 degree tilt, 360 degree rotation. Bulb and trim replacement.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gimbal adjustable downlight, 5 selectable colors, 2700K, 3000K, 3500K, 4000K and 5000K. 7 watts, 70000 hours life. UL Certified. 35 degree tilt, 360 degree rotation. Bulb and trim replacement.
|
Liteline Recessed Combo, 120 VAC, Trim Type: Shower, Lamp Base: E26 Medium, Lamp Type: A19 LED, Lamp Wattage: 7 W, Housing Type: New Construction, Insulation Type: Non-Insulated, Recessed Mounting, Ballast Type: Dimmable, Average Life: 40,000 hr, Lumens: 490, Color Temperature: 3000 K, Recessed Can Diameter: 4 in, Trim Color: White, Dimmable
|
No driver, quick and easy to install. White with acrylic lens, dimmable, recess mounted, j-box included. Suitable for wet location and contact with insulation, minimum start temperature is -40 deg C.
|
|
|
|
|
|
|
|
|
|
|
|
|
Non-insulated remodel. Directional trim. Suitable for dry and damp locations. Requires 1 x 50 W GU10 bulb (included). 3-5/8 in W x 5-7/8 in H.
|
|
|
3 Store Locations