|
|
|
|
|
|
|
|
|
|
|
|
|
|
System 636 PVC flue gas venting system offers regular and increaser couplings to help meet manufacturers recommended installation practices.
|
Vent screens are added to the hub end of elbows used to terminate exhaust and intake pipe runs on the outside wall of a building to keep dirt, debris and animals out of the venting system.
|
An elbow is installed when a change of direction is needed in a vent line. Two 45 deg elbows can be used in place of a 90 deg elbow if needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
System 636 PVC flue gas venting system offers regular and increaser couplings to help meet manufacturers recommended installation practices.
|
IPEX System 636 Pipe Tee, Nominal Size: 2 in, Hub Connection, Operating Temperature: 65 deg C, PVC
|
An elbow is installed when a change of direction is needed in a vent line. Two 45 deg elbows can be used in place of a 90 deg elbow if needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
System 636 PVC flue gas venting system offers regular and increaser couplings to help meet manufacturers recommended installation practices.
|
Imperial Gasket Rope Kit, For: Airtight Stoves, Fireplace Inserts and Coal and Pellet Stoves, Includes: Rope and 59 ml Bottle of Gasket Cement
|
The condensate drain kit is designed to be used with a tee in the exhaust vent line to drain condensate through 1/2 in solid PVC pipe or flexible tubing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IPEX System 636 Pipe Tee, Nominal Size: 3 x 1-1/2 in, Hub Connection, Operating Temperature: 65 deg C, Schedule Rating: SCH 40, PVC
|
Imperial Furnace Short Increaser, 3 to 4 in, Galvanized, 30 ga
|
Imperial Round End Cap, Cold Rolled Steel, Matte, Black, Wall Thickness: 24 ga, 6 in Dia, 2 in L, Suitable for: Stove Pipe
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
An elbow is installed when a change of direction is needed in a vent line. The 90 deg elbow is a long radius elbow to reduce the restriction on airflow in the exhaust or intake line.
|
Replaces cork, felt, rubber, paper and asbestos gaskets. Resists oil, transmission fluids, water and anti-freeze. Use on valve covers, thermostats, timing chain covers, oil pans, compressors and more.
|
IPEX Cement, Net Content: 473 mL, Liquid, Gray, Odor/Scent: Ketone, Compositions: Tetrahydrofuran (THF), Methyl Ethyl Ketone (MEK), Cyclohexanone, VOC Content: <510 g/L, Flash Point: -4 deg F, Boiling Point: 151 deg F, Flammability Rating: 3, Density: >2, Specific Gravity: 0.9611, Applicable Materials: PVC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Round End Cap, Black, 24 ga Thick Wall, 8 in Dia, For: Stove Pipe
|
Imperial Furnace Short Increaser, 6 to 7 in, Galvanized, 28 ga
|
Imperial Connector Union, 24 ga Thick Wall, 7 in Dia, For: Stove Pipe
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Furnace Short Increaser, 5 to 6 in, Galvanized, 30 ga
|
Imperial Furnace Short Increaser, 4 to 5 in, Galvanized, 30 ga
|
Imperial Tee, 4 in, 30 ga, Galvanized Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Stove Pipe Elbow, 6 in, 45 deg, 24 ga, Steel, Matte, Black
|
Imperial Tee, 5 in, 30 ga, Steel
|
Selkirk SuperVent 2100 Finishing Plate, Specifications: 6 in Size, Stainless Steel, Dimensions: 10 in Dia x 16 in W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to conceal the crimped end on the last length in the system.
|
Selkirk Locking Band, Stainless Steel, 6 in Dia
|
Selkirk SuperVent Chimney Locking Band, Stainless Steel, 7 in Dia
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selkirk Wall Band, Stainless Steel, 6 in Dia
|
Selkirk Wall Band, Stainless Steel, 7 in Dia
|
Imperial Stove Pipe Elbow, 7 in, 45 deg, 24 ga, Steel, Matte, Black
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selkirk SuperVent 2100 Finishing Plate, Specifications: 8 in Size, Stainless Steel, Dimensions: 12 in Dia x 18 in W
|
Selkirk Shielding Insulation, 12 in, Dimensions: 48 in L, Suitable for: JSC Attic Insulation Shield, JSC Cathedral Ceiling Support, JSC Wall Thimble
|
Selkirk Roof Flashing Storm Collar, 10 in Dia, Aluminum
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selkirk SuperVent 2100 Trim Collar, 10 in ID x 16 in OD Dia, Matte, Black, Pipe Size: 8 in
|
Selkirk SuperVent 2100 Storm Collar, 11 in Dia, Stainless Steel, Pipe Size: 7 in
|
Selkirk SuperVent 2100 Trim Collar, 9 in ID x 16 in OD Dia, Matte, Black, Pipe Size: 7 in
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selkirk Storm Collar, Specifications: 8 in Size, Aluminum, Dimensions: 4-1/2 in H
|
Selkirk Wall Band, Stainless Steel, 8 in Dia
|
Selkirk Wall Band, Stainless Steel, 7 in Dia
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selkirk SuperPro Rafter Radiation Shield, 6 in, Dimensions: 12 in Dia x 12 in H
|
IPEX System 636 Flue Gas Vent Pipe, 2 in Dia Outside, PVC, Temperature Rating: 149 deg F, 10 ft L
|
Selkirk SuperVent Rafter Radiation Shield, 7 in, Dimensions: 13 in Dia x 12 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Double wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy-gauge stainless steel inner liner. 1/4 in air space between inner and outer pipes provides great insulating value. 6 in clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8 in per joint. Listed to ULC S641 and UL 103 standards.
|
SELKIRK Chimney Adaptor, 6-1/2 in, Stainless Steel, Black, 5-3/4 in L, 6 in Dia
|
Double wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy-gauge stainless steel inner liner. 1/4 in air space between inner and outer pipes provides great insulating value. 6 in clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8 in per joint. Listed to ULC S641 and UL 103 standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selkirk Chimney Adapter, 7-1/2 in Connection, Stainless Steel, Black, 5-3/4 in L, 7 in Dia
|
Double wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy-gauge stainless steel inner liner. 1/4 in air space between inner and outer pipes provides great insulating value. 6 in clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8 in per joint. Listed to ULC S641 and UL 103 standards.
|
Selkirk Stove Pipe Adapter, Black, 7 in Dia
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selkirk Stove Pipe Adapter, Stainless Steel, Black, 7 in Dia
|
Selkirk Stove Pipe Adapter, Stainless Steel, Black, 6 in Dia
|
Selkirk SuperVent 2100 Roof Support, Specifications: 6 in Size, Stainless Steel, Dimensions: 19 in W x 5 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Black stove pipe connects a wood stove to insulated chimneys. Double wall system features a black aluminized steel outer casing and stainless steel inner liner. 6 in clearance to combustible materials.
|
Selkirk SuperVent Roof Support, Specifications: 6 in Size, Dimensions: 8 in W x 5 in H
|
Used to complete the connection between DSP double wall stove pipe and any insulated chimney system.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selkirk SuperPro Radiation Shield, 6 in, Stainless Steel, Dimensions: 10 in Dia x 19 in H
|
Selkirk SuperVent Chimney Pipe, 8 in Dia Outside, 6 in Dia Inside, Material Gauge: 0.015, 0.016 in, Stainless Steel, Temperature Rating: 1000 deg F, 12 in L, Nominal Width: 6 in
|
Selkirk SuperVent Roof Support, Specifications: 7 in Size, Dimensions: 9 in W x 5 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SELKIRK Chimney Adaptor, 7-1/2 in, Stainless Steel, Black, 7 in L, 7 in Dia
|
Selkirk Stove Pipe Tee, Nominal Size: 18 in, Dimensions: 11-1/4 in L x 11-1/4 in W x 24-1/2 in H
|
Selkirk Stove Pipe Reducer, Nominal Size: 7 to 6 in, Temperature Rating: 1200 deg F, Aluminized Steel/Stainless Steel, Enamel, Black, 9-5/8 in L
|
|
|
3 Store Locations
