|
|
|
|
|
|
|
|
|
|
|
Male pipe thread x left hand male thread.
|
Replacement part for most Mr. Heater tank top models. Proir to 2011.
|
End fitting for Type 1, QCC-1 gas grill systems. For appliances with 80,000 Btu or less. Threaded shut-off, excess flow safety.
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4 in male pipe threat. Restricted flow, soft nose P.O.L. Most commonly used to connect 1/4 in female pipe thread to 7/8 in female P.O.L.
|
1/4 in male pipe thread x 1 in -20 female throwaway cylinder thread.
|
1/4 in male pipe thread x 1 in - 20 male throwaway cylinder thread.
|
|
|
|
|
|
|
|
|
|
|
|
|
Soft nose excess flow P.O.L x 1/4 in male pipe thread.
|
"Soft nose P.O.L. Most commonly used to connect 9/16"" female left hand thread to 7/8"" female P.O.L."
|
3/8 in male pipe thread x 3/8 in female flare. Most commonly used to hook a low pressure regulator to an appliance.
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with "Buddy" heaters. Most commonly used with bulk cylinder and hose assembly.
|
9/16 in left hand male thread x 1 in - 20 throwaway cylinder thread with shut-off.
|
1/4 in male pipe thread x full flow male plug. For all appliances and all Btu or high pressure appliances. Can be used with F276334 or can replace excess flow plug in F276181, F276186 and F276330 kits.
|
|
|
|
|
|
|
|
|
|
|
|
|
90 deg Propane low-pressure regulator is most commonly used on low pressure appliances.
|
1/4 in male pipe thread x 3/8 in female flare. Replaces most hose assemblies between regulator and fish cooker/smoker, torches or other appliances.
|
Acme flexible pigtail hose assembly. 1/4 in inverted male flare x ACME Nut. Connects to a stay a while tee and auto-changeover dual stage regulator.
|
|
|
|
|
|
|
|
|
|
|
|
|
3/8 in male pipe thread x 3/8 in female flare. Most commonly used to hook a low pressure regulator to an appliance.
|
9/16 in left hand female threads on both ends. Used to connect one hose or for additional length connect two F276148, (Orgill Sku No. 418.3968) hoses with F276154, (Orgill Sku No. 437.0888) brass fitting.
|
Commonly used in most weed burners, torches and fish cookers. 1/4 in female pipe thread x 1/4 in male pipe thread.
|
|
|
|
|
|
|
|
|
|
|
|
|
3/8 in male pipe thread x 3/8 in female pipe thread. Often used to connect low pressure appliances to low pressure regulators.
|
90 deg low pressure regulator with appliance end fitting and Acme nut is most commonly used on propane gas grills.
|
3/8 in FPT x P.O.L 11 in low-pressure regulator will operate barbecue grills and low pressure appliances.
|
|
|
|
|
|
|
|
|
|
|
|
|
Low pressure propane regulator is most commonly used on low pressure appliances that are up to 140,000 btus.
|
3/8 in male pipe thread x 3/8 in female pipe thread. CSA certified. UL approved.
|
Connects appliances designed to use 1 lb disposable cylinder to a 5 to 20 lb cylinder. Hand tighten swivel on both ends. Swivel 1 in -20 male throwaway cylinder thread x soft nose excess flow P.O.L. with handwheel. Commonly used with portable Buddy & Big Buddy w#017-4755 fuel filter.
|
|
|
|
|
|
|
|
|
|
|
|
|
Full flow soft nose P.O.L x 1/4 in female pipe thread. Range of 0 to 20 psi. Most commonly used on torches, fish cookers, smokers or other high pressure appliances. 400,000 Btu capacity. UL listed.
|
1/4 in male pipe thread x 1/4 in female pipe thread.
|
Connects appliances designed to use 1 lb disposable cylinder to a 5 to 20 lb cylinder. Hand tighten swivel on both ends. Swivel 1 in -20 male throwaway cylinder thread x soft nose excess flow P.O.L. with handwheel. Commonly used with portable Buddy & Big Buddy w#017-4755 fuel filter.
|
|