|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use in low pressure applications. Hand tightening provides leak-proof metal to metal seal. Corrosion-resistant brass.
|
All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.
|
All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.
|
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
|
This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial Interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Paslode Lubrication Oil, Cordless Nailer, Net Content: 4 oz, Bottle, Liquid, Odor/Scent: Mild Petroleum, Amber, Compositions: Mineral Oil, Vegetable Oil, Flash Point: 320 deg F, Relative Density: 0.95
|
Vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy-duty die-cast body. Hang up hook and 1/4 in NPT female inlet included. Meets OSHA regulation 1001 for 30 psi "dead head" pressure. Inlet pressure rating of 150 psi.
|
Tru-Flate Air Line Manifold, 3-Way, 3-in-1, Nominal Size: 1/4 in, NPT Connection
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tru-Flate Air Coupler, Industrial, Specifications: 3/8 in Connection, Inverted Male x MNPT Connection Type, Steel
|
This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.
|
This plug is the most easily recognized design. The long 3/4 in pilot is so distinctive it cannot be confused with any other designs. Couplers are available in sleeve type only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
|
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
|
Amflo? PVC air hose is ideal for general-purpose applications. It features a lightweight, flexible, kink-resistant design with bend restrictors. Its bright florescent colors reduce chances of tripping while on a jobsite.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The lightweight of polyurethane hose makes it ideal for applications where dragging a heavy hose is an issue, like roofing. The smooth, non-marring finish also makes it ideal for indoor trim work where scratching surfaces could create damage. Maintains very good cold weather flexibility. Swivel end fittings reduce hose twist and bend restrictors reduce kinking and help increase the life of the hose.
|
Tru-Flate? airline filters are used for all airline applications where efficient filtration is required. Filtration removes airborne solid contaminants, pipe scale, rust, condensate and more, which may cause wear or failure of pneumatic components. Large filter element surface gives low pressure drop and long element life.
|
Tru-Flate? airline regulators employ a solid piston and balanced poppet for excellent performance and longer life. The solid piston design is reliable for a broad range of demanding applications and is impervious to a wide range of lubricating oils and greases. Unlike diaphragms, the solid piston resists rupture, cracking or tearing under pressure, constant flexing or high-cycle rates. It is impervious to most chemicals, provides accurate control and assures smooth, uninterrupted operation. Tru-Flate? airline regulators have fast reverse flow capabilities, allowing installation where dual pressures are required. Feature 2 ga ports and include pressure gauge and non-rising, locking knob adjustment. Maximum pressure 250 psi primary, 2 to 125 psi secondary.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tru-Flate? airline filters are used for all airline applications where efficient filtration is required. Filtration removes airborne solid contaminants, pipe scale, rust, which may cause wear or failure of pneumatic components. Large filter element surface gives low pressure drop and long element life. The mini series of airline filters offers a higher degree of filtration. All filters are complete with filter element and either manual or automatic drains. Maximum pressure 150 psi at 125 deg F with polycarbonate bowl and 250 psi at 175 deg F with metal bowl. Temperature range -10 to +175 deg F.
|
Paslode Air Line Lubricant, Package Size: 16 oz, Liquid, Odor/Scent: Mild Petroleum, Amber, Composition: Mineral oil, Vegetable oil, Flash Point: 160 deg C, Relative Density: 0.95
|
Features a 3-piston "V" style cast iron pump for longer life. Produces 16.5 cfm at 90 psi with a max pressure of 150 psi. No magnetic starter required. Oil sight glass. Enclosed belt guard. Heavy-duty pressure switch. ASME certified tank that meets the national pressure vessel certifications.
|
|
|
3 Store Locations
