Home > FASTENERS > NUTS, BOLTS, SCREWS > CONSTRUCTION SCREWS - BULK
We found 24 results matching your criteria.
Choose a sub category:
SCREWS - BULK - DRYWALL -COARS SCREWS - BULK - DRYWALL -FINE SCREWS - BULK - FLOOR - PLAIN
SCREWS - BULK - DECK - COATED SCREWS - BULK- MULTI USE -COAT SCREWS - BULK- MULTI USE -YLW/
SCREWS - BULK- STRUCTURE -COAT
Sort By:
Page of 1
SCREW DCK FLT HD BRWN 10X3-1/2 SCREW DECK FLT HD BRWN 8X2-1/2 SCREW DRWL 6X1-1/4
Reliable Screw, Thread Size: #10-9, 3-1/2 in L, Thread Type: Coarse, Partial, Head Type: Bugle, Flat, Drive Type: Square, Point Type: Regular, Steel, Ceramic, Package Quantity: 1000 BX, Thread Length: 1-3/4 in, Drive Size: #2, Applicable Materials: Softwood Reliable FKCBR Deck Screw, Thread Size: #8-10, 2-1/2 in L, Thread Type: Coarse, Partial, Head Type: Bugle, Flat, Drive Type: Square, Point Type: Regular, Steel, ACQ Brown Ceramic, Package Quantity: 2000 BX, Drive Size: #2, Applicable Materials: Softwood, Suitable for: Square Tip Screwdriver Reliable Screw, Thread Size: #6-9, 1-1/4 in L, Thread Type: Coarse, Head Type: Bugle, Flat, Drive Type: Phillips, Point Type: Type W, Steel, Black Phosphate, Package Quantity: 8000 BX, Drive Size: #2, Material Gauge: 25 to 20 ga, Applicable Materials: Drywall, Metal Stud, Wood
SCREW DRWL TYPE-S 6X1-1/4     SCREW BUGLE HEAD YZ 10X4      SCREW BUGLE HEAD YZ 8X1-1/4
Reliable Screw, Thread Size: #6-15, 1-1/4 in L, Thread Type: Fine, Head Type: Bugle, Flat, Drive Type: Phillips, Point Type: Type S, Steel, Black Phosphate, Package Quantity: 8000 BX, Drive Size: #2, Material Gauge: 25 to 20 ga, Applicable Materials: Drywall, Metal Stud, Wood Reliable FKCYZ Screw, Thread Size: #10-9, 4 in L, Thread Type: Coarse, Partial, Head Type: Bugle, Flat, Drive Type: Square, Point Type: Regular, Steel, Yellow Zinc, Package Quantity: 1500 BX, Thread Length: 2 in, Drive Size: #2 Reliable FKCYZ Screw, Thread Size: #8-10, 1-1/4 in L, Thread Type: Coarse, Partial, Head Type: Bugle, Flat, Drive Type: Square, Point Type: Regular, Steel, Yellow Zinc, Package Quantity: 7500 BX, Thread Length: 0.832 in, Drive Size: #2
SCREW BUGLE HEAD YZ 8X1-1/2   SCREW STRUCT STEEL 1/4X3-1/2IN SCREW RSS 10X3-1/8IN
Reliable FKCYZ Screw, Thread Size: #8-10, 1-1/2 in L, Thread Type: Coarse, Partial, Head Type: Bugle, Flat, Drive Type: Square, Point Type: Regular, Steel, Yellow Zinc, Package Quantity: 6500 BX, Thread Length: 0.999 in, Drive Size: #2 GRK's RSS??? rugged structural screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws which are 3-1/8 in and longer have a six threaded CEE thread that enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increasing the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates. GRK's RSS? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS? screw in pre-drilled hardware like hinges and connector plates.
SCREW MULTI-PURPOSE 10X4IN    Camo 0345219S Deck Screw SCREW MULTI-PURPOSE 10X3-1/2IN
GRK Fasteners R4 Framing and Decking Screw, Multi-Purpose, Thread Size: #10, Thread Length: 2.992 in, 4 in L, Head Type: Round, Drive Type: Star, Drive Size: T-25, Steel, Applicable Materials: Cement, Fiber Board, Melamine, Particle Board, Plastic, Sheet Metal, Wood Camo Deck Screw, NO 7 Screw, 1-7/8 in Length, Trim Head, Star Drive, 316 Stainless Steel GRK Fasteners R4 Framing and Decking Screw, Multi-Purpose, Thread Size: #10, Thread Length: 2.362 in, 3-1/2 in L, Head Type: Round, Drive Type: Star, Drive Size: T-25, Steel, Applicable Materials: Cement, Fiber Board, Melamine, Particle Board, Plastic, Sheet Metal, Wood
SCREW MULTI-PURPOSE 10X3-1/8IN SCREW RSS 5/16X4IN            SCREW RSS 5/16X3-1/8IN
GRK Fasteners R4 Framing and Decking Screw, Multi-Purpose, Thread Size: #10, Thread Length: 2.087 in, 3-1/8 in L, Head Type: Round, Drive Type: Star, Drive Size: T-25, Steel, Applicable Materials: Cement, Fiber Board, Melamine, Particle Board, Plastic, Sheet Metal, Wood GRK's RSS? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS? screw in pre-drilled hardware like hinges and connector plates. GRK's RSS? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS? screw in pre-drilled hardware like hinges and connector plates.
SCREW RSS 5/16X5-1/8IN        SCREW RSS 3/8X7-1/4IN         SCREW MULTI-PURPOSE 12X5-5/8IN
GRK's RSS? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS? screw in pre-drilled hardware like hinges and connector plates. RSS rugged structural screw is an easy to install lag alternative. GRK Fasteners R4 Framing and Decking Screw, Multi-Purpose, Thread Size: #12, Thread Length: 3 in, 5-5/8 in L, Head Type: Round, Drive Type: Star, Drive Size: T-25, Steel, Applicable Materials: Cement, Fiber Board, Melamine, Particle Board, Plastic, Sheet Metal, Wood
SCREW RSS 5/16X6IN            SCREW RSS 3/8X4IN             SCREW RSS 3/8X6IN
GRK's RSS? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS? screw in pre-drilled hardware like hinges and connector plates. GRK's RSS??? screw is made of specially hardened steel to provide you with high-tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield has no sharp edges like conventional lag screws. The added shoulder underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates. GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates.
SCREW RSS 3/8X8IN             SCREW RSS 3/8X10IN            SCREW RSS 3/8X12IN
GRK's RSS? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS? screw in pre-drilled hardware like hinges and connector plates. GRK's RSS??? screw is made of specially hardened steel to provide you with high-tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield has no sharp edges like conventional lag screws. The added shoulder underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates. GRK's RSS??? screw is made of specially hardened steel to provide you with high-tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield has no sharp edges like conventional lag screws. The added shoulder underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates.