|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic roller with narrow center groove 7/32 in W nylon wheel, concave edge. Includes a 8-32 x 3/8 in machine screw with binder post nut. Fits on air control doors.
|
This die-cast keeper or strike is used by many screen door manufacturers. It is 7/32 in wide with a 1/4 in deep projection. It has an downward hook and adjustment slots that allows it to be adjusted up or down to the correct position to engage the latch.
|
Non-handed, surface mount, economy pulls, plastic assembly. Contains one black inside pull, one black outside pull, #4 8 x 3/8 in Phillips flat head sheet metal screws. 1-7/8 in W x 4 in H.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4 in W center groove nylon wheel, high-tension 2-1/2 in L heat-treated steel spring and #8 x 3/8 in Phillips pan head sheet metal screw.
|
Used by several door manufacturers for non-handed mortise installations. Sliding activator button designed for Jim Walters sliding roll-formed screen door. Includes black plastic inside pull and latch activator, black plastic outside pull, steel latch assembly, pop rivet and installation screws. 2-1/8 in W x 4-1/4 in H handles, 3-5/8 in CTC.
|
Non-handed; mortise installation, used by several door manufacturers. Includes one plastic inside and outside pull, one steel latch assembly, one plastic activator, one pop rivet and installation screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat-treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw.
|
For sliding glass doors. Center grooved, 5/16 in W steel ball bearing roller and steel inner race with 1/4 in - 20 x 3/4 in carriage bolt and 1/4 in - 20 hex nut.
|
2-roller tandem design. 6-1/4 in L x 1-3/16 in H x 11/16 in D adjustable steel housing with 2 steel ball bearing rollers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel housing and hook, round end face plate. Hook position is adjustable, fits on W&F. Hole center of 3-11/16 in.
|
Standard reversible surface-mount for left or right-handed mortise-locking doors. Die-cast inside pull has wood handle, die-cast thumb turn and steel latch activator. Outside pull is die-cast.
|
Standard reversible surface mount for left or right handed mortise locking doors. Die-cast inside pull and thumb turn with steel latch activator. Outside pull is die-cast and has a removable knockout plug for adding a key cylinder. Note: Mounting holes may need to be enlarged to 5/16 in Dia if base of handle does not seat flush against surface of door.
|
|
|
|
|
|
|
|
|
|
|
|
|
Reversible surface mount for left or right handed mortise locking doors. Die-cast inside pull and thumb turn with hook style steel latch activator. Outside pull is die-cast and must use an E-2145 if key locking feature is desired. NOTE: Latch Lever is offset from center.
|
|
|
3 Store Locations
