Home > HAND TOOLS > STRIKING AND CUTTING TOOLS > RIPPING/CHISELING > PUNCHES & DRIFTS
We found 29 results matching your criteria.
Sort By:
Page of 1
PUNCH CENTER 5/64X4-1/2IN CENTER PUNCH 1/4 X 4IN PRICK PUNCH 5/16 X 4-1/2IN
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank. Pro Center Punch, 1/4 in Tip, Shank Type: Hex, Shot Blast, 4 in L Mayhew Prick Punch, 5/16 in Tip, Shank Type: Hex, Black Oxide, 4-1/2 in L
CENTER PUNCH 5/16X4-1/2X5/32IN PIN PUNCH 3/32 X 4-1/2IN PRICK PUNCH 3/8 X 5IN
Center punches are used for piercing, marking or starting drills in metal and other materials. The points differ to achieve the most appropriate hole size. This punch is not meant for scribing lines in metal. A black oxide finish is added to protect from rust. Made in the USA. Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keys. Extensive sizes are available as well as a black oxide finish for rust protection. Made in the USA. Mayhew Prick Punch, 3/8 in Tip, Shank Type: Hex, Black Oxide, 5 in L
PRICK PUNCH 3/32 X 4IN PIN PUNCH 1/8 X 4-1/2IN PUNCH CENTER 1/8X5/16X5IN
Mayhew Prick Punch, 3/32 in Tip, Shank Type: Hex, Black Oxide, 4 in L Mayhew Pin Punch, 1/8 in Tip, Shank Type: Hex, Shank Diameter: 1/4 in, Black Oxide, 4-1/2 in L The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
PIN PUNCH 1/16 X 4IN LONG PIN PUNCH 5/32 X 6IN PUNCH CENTER 5/32X5-1/2IN
Mayhew's pin punches are used to drive out and remove already loosened pins and keys after initial movement by a solid punch. Available in fractional and metric sizes, variable point sizes and lengths for different applications. Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keys. Extensive sizes are available as well as a black oxide finish for rust protection. The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
LONG PIN PUNCH 3/16 X 6IN SOLID PUNCH W/HND TAG 5/32X5IN CENTER PUNCH 7/16X5X1/4IN PT
Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keys. Extensive sizes are available as well as a black oxide finish for rust protection. Mayhew Solid Punch with Hand Tag, 5/32 in Tip, Shank Type: Hex, Shank Diameter: 3/8 in, Shot Blast, 5 in L Pro Center Punch, 7/16 in Tip, Shank Type: Hex, Shot Blast, 5 in L
PILOT PUNCH W/HAND TAG 1/8X4IN PIN PUNCH LONG 1/4 X 6IN SOLID PUNCH 1/8 X 5IN
Also known as roll pin punches, Mayhew's pilot pin punches are an original Mayhew patented design with a rounded end that fits snugly within a roll pin is used to drive in and remove roll pins or other hollow tension pins. Available in fractional or metric sizes, variable point sizes are available for variable radius sizes for all pin configurations. Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keys. Extensive sizes are available as well as a black oxide finish for rust protection. Mayhew Solid Punch, 1/8 in Tip, Shank Type: Hex, Black Oxide, 5 in L
PIN PUNCH W/HAND TAG 5/16X6IN CENTER PUNCH 1/2X6X5/16IN PT SOLID PUNCH W/HND TAG 3/16X5IN
Mayhew's pin punches are used to drive out and remove already loosened pins and keys after initial movement by a solid punch. Available in fractional and metric sizes, variable point sizes and lengths for different applications. Center punches are used for piercing, marking or starting drills in metal and other materials. The points differ to achieve the most appropriate hole size. This punch is not meant for scribing lines in metal. A black oxide finish is added to protect from rust. Made in the USA. Mayhew Solid Punch with Hand Tag, 3/16 in Tip, Shank Type: Hex, Shank Diameter: 3/8 in, Shot Blast, 5 in L
PUNCH CENTER 1/4X6IN PILT PUNCH W/HND TG 3/16X4.5IN LINE-UP PUNCH 3/16 X 9IN
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank. Also known as roll pin punches, Mayhew's pilot pin punches are an original Mayhew patented design with a rounded end that fits snugly within a roll pin is used to drive in and remove roll pins or other hollow tension pins. Available in fractional or metric sizes, variable point sizes are available for variable radius sizes for all pin configurations. Line-up punches are used to align the holes through which rivets, pins or bolts will be inserted, but not for driving the hardware. Sizes vary for the optimal alignment.
LINE-UP PUNCH 1/4 X 10IN General Tools 70079 Utility Center Punch General Tools 87 Center Punch
Mayhew's line-up punches are used to align holes through which rivets, pins or bolts will be inserted. Available in variable point size, shank size and taper length for the ideal alignment. Lightweight aluminum body with alloy steel internal components that provides accurate center punches to prevent drill bits from traveling. One-handed operation. No hammer needed. Provides accurate center punches without drill bit traveling, one-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Replaceable hardened steel point and black oxide finish prevents rust.
General Tools 79 Center Punch PILOT PUNCH SET BLAST FINISH
Provides accurate center punches to prevent drill bits from traveling, handles heavy-duty metals, yet not overbearing when working with wood or thin-walled tubing. One-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Black oxide finish to prevent rust. Used for punching, marking and staking and hardened steel point is replaceable. Mayhew's punches sets are both rugged and dependable. Available in numerous styles and sizes, you be able to tackle any application from masonry to metalworking, setting, driving, removing and more.