|
|
|
|
|
|
|
|
|
|
|
|
|
|
The scratch awls has a high impact plastic handle length of 4 in with a hardened and tempered steel blade. It can be used to start holes in soft wood and scribe or mark wood or other soft metals.
|
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
The Vulcan claw is made of heat-treated carbon steel blade with a square plastic handle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
The Vulcan pry bar nail puller is made of dropped forged steel with hexagon steel construction for enhanced strength. It's a single claw tool.
|
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Vulcan pry bar is made from dropped forged steel. It has a matte black finish and the nail slots at both ends offer easy accessibility and leverage.
|
Richard Lever Bar Scraper, Tip Type: Chisel, HCS, 10 in L
|
Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 1/2 in tip and 6 in L.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
|
Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 3/8 in tip and 5-1/2 L.
|
Rip out nails quickly and efficiently with the help of the Garant hexagonal wrecking bar. This 18 in (45.7 cm) tool is made of forged steel and polished surfaces for increased strength and rigidity. Its goose-shaped neck facilitates the removal of nails. It has a crowbar at one extremity for better leverage and a nail puller at the other extremity. This wrecking bar is designed for DIYers and professionals looking for an efficient tool for small construction projects.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Vulcan utility bar is made from dropped forged steel (hardness for blade HRC 38-42) 6 mm thick. It has a matte black finish and nail slots at both ends offer easy accessibility and leverage.
|
It enables you to quickly and easily locate the tool around the head of the protruding nail.
|
Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 5/8 in tip and 6-1/2 L.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Vulcan pry bar nail puller is made from drop-forged steel with hexagon steel construction for enhanced strength. It's a double claws tool and be used for precision nail pulling and prying.
|
Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 3/4 in tip and 7 in L.
|
Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rip out nails, lift and rake wood, open crates and boxes quickly and efficiently with the help of the Garant flat nail puller. This 15 in tool is made of forged and tempered steel for increased strength and rigidity. Its beveled extremities avoids damaging surfaces and one of the crowbars can be sharpened. This pry bar is especially designed for DIYers and professionals looking for a robust, reliable and efficient tool for various types of projects demanding minimum leverage.
|
Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 1 in tip and 8 in L.
|
Rip out nails quickly and efficiently with the help of the Garant hexagonal wrecking bar. This 30 in (76.2 cm) tool is made of forged steel and polished surfaces for increased strength and rigidity. Its goose-shaped neck facilitates the removal of nails. It has a crowbar at one extremity for better leverage and a nail puller at the other extremity. This wrecking bar is designed for DIYers and professionals looking for an efficient tool for small construction projects.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Estwing's Handy claw is the best tool for getting under and removing nails, with a comfortable vinyl grip.
|
Features heavy-duty, chrome alloy steel with baked enamel. Includes 3 pieces: (1) 5/16 x 5 in, (1) 5/8 x 6-1/2 in, (1) 3/4 x 7 in chisels.
|
Lightweight aluminum body with alloy steel internal components that provides accurate center punches to prevent drill bits from traveling. One-handed operation. No hammer needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drop-forged heat-treated steel construction. Offset, hexagon steel with large capacity extracting claws and combination puller. Used for industrial demolition, ripping out nails, walls, studs and framework. Stock size 2-1/4 in, black oxide finish resists rust and corrosion.
|
Estwing's 12 in and 15 in nail pullers have polished ends and are extremely strong and durable, these tools can pull a variety of fasteners. The nail puller claws are precise and sharp to remove imbedded or headless nails with ease and minimal wood damage. Shaped rounded head design gives you improved leverage. Precision thin claw design enables you to get into hard to reach places.
|
Provides accurate center punches without drill bit traveling, one-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Replaceable hardened steel point and black oxide finish prevents rust.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bar is forged half round, for added strength and less weight with wide, thin blade for easy prying.
|
Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern.
|
The 10 in and 12 in molding puller is made of fine tool steel, drop-forged and tempered for extra durability. Chrome finish and comfortable blue cushion grip. Precision thin blade for removing molding without damaging the wall. Slot in blade for removing small nails and brads. Other end has popular Japanese nail puller with precise and sharp claws for removing imbedded nails or headless nails with ease and minimal damage. Blade end for removing molding precision claw allows finished nails to be pulled through molding so the molding can be reused.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Estwing's 12 in and 15 in nail pullers have polished ends and are extremely strong and durable, these tools can pull a variety of fasteners. The nail puller claws are precise and sharp to remove imbedded or headless nails with ease and minimal wood damage. Shaped rounded head design gives you improved leverage. Precision thin claw design enables you to get into hard to reach places.
|
Rip out nails quickly and accurately with the help of the Garant nail puller. This 14 in tool is made of forged and tempered steel for increased strength and rigidity and a polished work surface to reduce damages to material. The crowbar occupies little space for a precise and easy insertion under headless or embedded nails. Slits at both extremities facilitates the removal of nails. This nail puller is especially designed for DIYers and professionals looking for a robust, reliable and efficient tool for various type of construction projects.
|
Provides accurate center punches to prevent drill bits from traveling, handles heavy-duty metals, yet not overbearing when working with wood or thin-walled tubing. One-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Black oxide finish to prevent rust. Used for punching, marking and staking and hardened steel point is replaceable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Estwing's 12 in and 15 in nail pullers have polished ends and are extremely strong and durable, these tools can pull a variety of fasteners. The nail puller claws are precise and sharp to remove imbedded or headless nails with ease and minimal wood damage. Shaped rounded head design gives you improved leverage. Precision thin claw design enables you to get into hard to reach places.
|
Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern.
|
Rip out nails quickly and efficiently thanks to the Garant Pro Series T-shaped wrecking bar. This 36 in (91.4 cm) tool is made of ultra-robust forged and tempered steel. The shape of the head offers an excellent support and leverage which allows to push and pull with equal force and to work in small spaces. This excellent quality wrecking bar is especially designed for professionals looking for a robust, reliable and efficient tool.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Estwing's Lightweight I-beam construction pry bar has beveled nail slot. It's I-beam construction gives added strength while removing weight. Rocking head provides maximum leverage.
|
Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern.
|
Truly a unique patented roofing, siding and construction bar. Drop-forged from fine tool steel, one end has a thin blade with a 2-1/2 in. fulcrum giving it a higher lift than other bars. For removing shingles, downspouts, gutters and nails with ease. The other end has a Japanese pattern nail puller with rounded head to improve leverage and pull even the most difficult nails.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern.
|
Install and remove base boards and woodwork quickly and with precision with the help of the Garant 3-in-1 multi-bar. This 11-3/4 in (29.9 cm) tool is made with forged and tempered steel for increased strength and rigidity. The head allows to tap in and remove nails. The lower flat and beveled extremity allows lifting the base boards and woodwork and to scratch away residue with precision and without damaging the material. This 3-in-1 bar is especially designed for DIYers and professionals looking for a robust, reliable and efficient tool for various small carpentry projects.
|
Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drop-forged and heat-treated for added strength during prying, digging and tamping.
|
Drop-forged and heat-treated for excellent strength during prying, digging and tamping. Hexagon steel construction for enhanced strength, 1 in blade width.
|
Lift heavy loads when you have construction projects needing leverage with the help of the Garant Pro Series professional pinch point crowbar. This 60 in (152.4 cm), 18 lb tool is made of excellent quality forged and tempered steel for increased strength and rigidity. It has a beveled head with 1-1/8 in (2.9 cm) blade. Its flat surface allows for better control and insures an efficient energy transfer. This industrial-grade crowbar is especially designed for professionals looking for a robust, reliable and efficient tool to complete demanding jobs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drop-forged and heat-treated for added strength during prying, digging and tamping.
|
Drop-forged and heat-treated for excellent strength during prying and tamping.
|
|
|
3 Store Locations
